3M™ Frame Assembly Kit with screws Replacement part on 3M™ Full Facepieces 6000 Series. Use to secure 3M™ Lens Assembly 6898 to facepiece. Does not include lens.
3M™ Exhalation Valve This valve is used with the 3M™ Half Facepiece Respirators 7000 Series, and also used with the 3M™ Center Adapter 6864 on the 3M™ Full Facepiece Respirators 6000 Series
3M™ Qualitative Fit Test Apparatus, Sweet Can be used with any particulate respirator or gas and vapor respirator with a particulate filter to test face to seal fit. It can be used to help satisfy OSHA requirements.
3M™ Sensitivity Solution, Sweet Used to test the sensitivity of the respirator wearer to a saccharin solution. It is used with the 3M™ Qualitative Fit Test Apparatus FT-10 and 3M™ Training and Fit Testing Case FT-20.
3M™ Fit Test Solution, Sweet This solution is used with the FT-10 Qualitative Fit Test Apparatus. Meet the performance criteria for fit testing respirators under the current OSHA Standard for Respirator Protection: 29 CFR 1910.134, Appendix A.
3M™ Test Hood Used with 3M™ Qualitative Fit Test Apparatus FT-10 and FT-30 and 3M™ Training and Fit Testing Case FT-20 as the test environment for sweet and bitter solution.
3M™ Qualitative Fit Test Apparatus, Bitter Can be used with any particulate respirator or gas and vapor respirator with particulate filters to test face to seal fit. It can be used to help satisfy OSHA requirements.
3M™ Sensitivity Solution, Bitter Used to test the sensitivity of the respirator wearer to a bitter solution. It is used with the 3M™ Qualitative Fit Test Apparatus FT-30.
3M™ Helmet L-901, with Wide-view Faceshield This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It meets ANSI Type I, II hardhat requirements. It has shroud options and provides an assigned protection factor of 1000 x PEL.
3M™ Helmet L-905, with Welding Shield and Wide-view Faceshield This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It meets ANSI Type1, II hardhat requirements. It has shroud options and provides protection up to 1000 x PEL.